First Multi‐Isotopic (Pb‐Nd‐Sr‐Zn‐Cu‐Fe) Characterisation of Dust Reference Materials (ATD and BCR‐723): A Multi‐Column Chromatographic Method Optimised to Trace Mineral and Anthropogenic Dust Sources     

Aubry Vanderstraeten  Steeve Bonneville  Stefania Gili  Jeroen de Jong  Wendy Debouge  Philippe Claeys  Nadine Mattielli 《Geostandards and Geoanalytical Research》2020,44(2):307-329

Atmospheric dust is an integral component of the Earth system with major implications for the climate, biosphere and public health. In this context, identifying and quantifying the provenance and the processes generating the various types of dust found in the atmosphere is paramount. Isotopic signatures of Pb, Nd, Sr, Zn, Cu and Fe are commonly used as sensitive geochemical tracers. However, their combined use is limited by the lack of (a) a dedicated chromatographic protocol to separate the six elements of interest for low‐mass samples and (b) specific reference materials for dust. Indeed, our work shows that USGS rock reference materials BHVO‐2, AGV‐2 and G‐2 are not applicable as substitute reference materials for dust. We characterised the isotopic signatures of these six elements in dust reference materials ATD and BCR‐723, representatives of natural and urban environments, respectively. To achieve this, we developed a specific procedure for dust, applicable in the 4–25 mg mass range, to separate the six elements using a multi‐column ion‐exchange chromatographic method and MC‐ICP‐MS measurements.  相似文献   

Sequence stratigraphic framework and sedimentary model of Shanxi Formation in northeast Zhoukou Depression of the North China Plate     

《China Geology》2020,3(4):575-590

The sequence stratigraphic framework of Shanxi Formation in the northeast Zhoukou Depression was established based on detailed sequence stratigraphical and sedimentological analysis by utilizing the logging and core data of six wells drilled in the eastern tectonic unit of Zhoukou Depression. It was divided into three third-order sequences, namely SQs1, SQs2, and SQs3 from bottom to top. Each sequence can be divided into a transgressive system tract (TST) and a highstand system tract (HST). Furthermore, four sequence boundaries and three maximum flooding surfaces were identified, and they are the bottom interface SBs and maximum flooding surface mfss1 of SQs1, the bottom interface SBs1 and maximum flooding surface mfss2 of SQs2, the bottom interface SBs3 and maximum flooding surface mfss3 of SQs3, and the top interface SBx from bottom to top. Carbonate tidal flat –clastic tidal flat sedimentary system developed in Shanxi Formation in the northeast Zhoukou Depression (also referred to as the study area) under the control of regression. Meanwhile, four sedimentary microfacies were identified in the sedimentary system, which are lime-mud flats, sand flats, mixed flats, and mud flats. The transgression in the study area occurred from the southeast to the northwest. Therefore, the northwestern part is the seaward side, and the southeastern part is the landward side. As revealed by relevant drilling data, SQs1 of the Shanxi Formation is characterized by the development of limestone and carbonaceous mudstone, with limestone, dark mudstone, and carbonaceous mudstone mainly developing. Meanwhile, lime-mud flats were mainly deposited in it. During the periods of SQs2 and SQs3, the sedimentary environment of the study area changed from the carbonate tidal flats to clastic tidal flats as the coastline migrated towards the sea. In these periods, sand flats mainly developed near the maximum flooding surfaces and were relatively continuous in the eastern and southern parts of the transgressive system tract; mixed flats were relatively continuous in the western and northern parts of the transgressive system tract as well as the eastern and southern parts of the highstand system tract; mud flats widely developed in the highstand system tract. Peat flats mainly developed in the period of HSTs2, with coal seams relatively developing in the southeastern part of the study area as revealed by drilling data. The peat flats in SQs2 are favorable hydrocarbon source layers, the lime-mud flats in SQs1 and sand flats formed in the transgression periods of SQs2 and SQs3 constitute favorable hydrocarbon reservoirs, and the mud flats form in the transgressions periods serve as favorable cap rocks. Therefore, the study area features a reservoir-cap assemblage for self-generating and self-storing of hydrocarbon, and the southeastern part of the study area can be taken as a favorable exploration area.  相似文献   

渤海自由生活海洋线虫两个新纪录种     

赵丽萍  乔春艳  陆洋  孙静 《海洋与湖沼》2020,51(1):212-217

在对渤海滨州贝壳堤岛的自由生活海洋线虫进行分类和多样性研究中,发现2个我国新纪录种并进行了描述。其中,澳洲深咽线虫Bathylaimus australis Cobb,1894主要特征为:头刚毛长约20μm,分为4节,顶端膨大;前口腔大,无齿,后口腔小,具小齿;化感器双环形,位于口腔中部位置;交接刺细长,稍向腹面弯曲,近端膨大呈头状,长32-37μm;引带宽大,肾形,长36-40μm,末端角质化,渐尖。古氏努朵拉线虫Nudora gourbaultae Vincx,1989主要特征为:体表具12列纵向排列的V型装饰;第二体环较宽,头刚毛11-15μm(为头颈的67%-81%);化感器圆形,直径4-6μm(为相应体径的29%-38%),位于第二体环上;具双咽球;交接刺细长,弯曲呈S型,长为肛径的1.3-1.5倍;引带等于或长于交接刺,镰刀型,无肛前辅器。  相似文献   

守初心耕海探洋七十载担使命披风踏浪砥砺行——中国科学院海洋研究所70年发展纪实   总被引：1，自引：0，他引：1  

王凡  孙松 《海洋与湖沼》2020,51(4):664-672

中国科学院海洋研究所是新中国第一个专门从事海洋科学研究的国立科研机构,她的70年光辉历程是我国海洋科技事业从无到有、从弱到强的发展缩影,是新中国海洋科学调查研究自主创新发展历程的真实写照。本文简要介绍中国科学院海洋研究所的主要发展历程,回顾70年来取得的主要科技成就,并围绕新形势下建设海洋大科学研究中心等改革发展举措,讨论和展望研究所的未来发展。  相似文献   

溢油乳化过程C波段微波散射特性实验研究     

舒思京  孟俊敏  张晰  过杰  刘根旺 《海洋学报(英文版)》2020,39(7):135-145

本文基于水槽溢油观测实验，研究溢油乳化过程中表面散射特性的变化。利用全极化C波段微波散射计和矢量网络分析仪等测量设备对易发生乳化反应沥青含量小于3%的原油（A型油）、油田中开采出的新鲜原油（B型油）和经过脱水去杂质处理的工业原油（C型油）进行观测。文中详细分析了在C波段微波下乳化油膜与平静水面的后向散射差异，以及油膜乳化过程对后向散射的影响，结果显示在低风速、无浪的条件下（最大波高低于3mm），原油的乳化反应可通过表面粗糙度和自身介电常数的变化来调制雷达后向散射，并且这两种方式中表面粗糙度的影响占主导地位。对比B型和C型原油在乳化状态和未乳化状态下的表面后向散射，结果显示在各状态下B型油膜表面后向散射均大于C型油，且在VV、HH、HV/VH极化方式下两者后向散射平均差异分别为2.19 dB、2.63 dB、2.21 dB，在20%油膜含水率的乳化状态下差异较未乳化状态时小，平均差异分别为0.98 dB、1.49 dB、1.5 dB，结果表明不同类型油种间由于成分和油膜属性的不同会在一定程度上导致油膜表面粗糙度存在差异，影响油膜表面后向散射。  相似文献   

溢油对海洋生态系统内在价值损害的评估——以“塔斯曼海”轮溢油事故为例     

严志宇  孙冰  付红蕊  任杰 《海洋科学》2020,44(4):85-89

作者籍以能值和生态炯分析,将海洋生态内在价值补充到溢油损害评估中,并以"塔斯曼海"轮溢油事故为例,分析了生态系统内在价值损害评估的特点。结果表明溢油生态内在价值损害大于对生态服务价值的损害,前者是后者的6.9倍;能值变化反映对资本积累的损害,生态炯更突出了溢油对初级生产力的生态系统的影响。本评价是现有溢油损害评价的补充,可为彻底、有效环境治理、生态修复提供保障,对海洋开发管理决策和公众环保意识的提高将有积极的影响。  相似文献   

水面菲涅尔反射对~761 nm叶绿素荧光估算的影响     

温颜沙  邓建明  毛志华  石静  周杨  鲁婷  陆应诚 《遥感学报》2018,22(3):424-431

叶绿素荧光是光合作用的有效探针,可用于海洋浮游植物的监测与定量评估。太阳诱导叶绿素荧光覆盖可见光—近红外650—800 nm,在～685 nm与～740 nm表现出两个形态不同的荧光峰特征。基于～685 nm荧光峰的叶绿素浓度反演算法较为成熟,但在高悬浮物和高叶绿素浓度的水体中,算法的有效性不足。基于叶绿素荧光在氧气吸收谱段(O2-A)的填充作用,水体遥感反射率光谱～761 nm峰值中包含有太阳诱导叶绿素荧光信号,能用于水体叶绿素浓度的估算,但该反射峰形态特征还取决于传感器的光谱分辨率。本研究基于不同光谱分辨率的大气吸收谱线特征,模拟了水体遥感反射率光谱(750—775 nm)上太阳诱导叶绿素荧光的信号响应特征;分析了利用遥感反射率(～761 nm)计算叶绿素荧光的原理,阐明了不同光谱分辨率条件下水体叶绿素荧光信号在反射光谱上的形态变化规律。采用水面以上测量法获取的离水光谱辐亮度,包含了水面的菲涅尔反射信号,由于真实的菲涅尔系数难以准确测量,这给基于～761 nm处遥感反射率峰值的荧光信号估算带来不确定性影响。研究表明,假定菲涅尔系数为0时,虽然～761 nm叶绿素荧光信号与其浓度具有较好的线性统计关系,但却带来较大的不确定性;这种不确定的影响,在低浓度叶绿素水体中表现明显,在高浓度叶绿素水体中,影响相对较小;准确估算菲涅尔系数,有助于减少这种不确定性影响。对基于遥感反射率～761 nm叶绿素荧光信号的深入探讨,将能推动未来水体叶绿素荧光的识别与利用。  相似文献   

可见光波段灰度熵和热红外亮温差的沙尘遥感判识   总被引：1，自引：0，他引：1  

李彬  卢士庆  孙小龙  高健  孟翔晨  赵悦晨  吕迪波 《遥感学报》2018,22(4):647-657

沙尘作为对流层气溶胶的主要成分,对气候系统有许多影响;同时,作为环境污染物,对人类健康危害也很大。沙尘天气一般在春季爆发,对中国北方大部分区域的生产和生活有较大影响。以往针对沙尘遥感监测人们开展了许多研究,取得了一定的效果。但对于一些云和沙尘混合的复杂状况,传统方法识别效果较差,几乎不能有效识别出沙尘。采用葵花8号(Himawari-8)卫星数据,提出一种针对性的识别方法。引入了0.46μm和0.51μm反射率差值RDI,统计发现该指数在一定范围内可以表现出沙尘连续性特征,并有效地将中高云和大部分地表与沙尘区分开来。碎积云的RDI值分布与沙尘的较为相似,为此进一步引入了灰度熵方法来滤除。例举了3次沙尘过程的判识结果,并结合地面观测数据进行了验证。其中对2017年5月4日沙尘的地面验证表明,位于云沙混合区的27个站中有22个站的地面观测与判识相一致。对于一些复杂条件下的沙尘,该方法是对分裂窗亮温差的有效补充。  相似文献   

Modelling coastal land use change by incorporating spatial autocorrelation into cellular automata models   总被引：1，自引：0，他引：1  

Yongjiu Feng  Qianqian Yang  Zhonghua Hong  Li Cui 《国际地球制图》2018,33(5):470-488

This paper presents a spatial autoregressive (SAR) method-based cellular automata (termed SAR-CA) model to simulate coastal land use change, by incorporating spatial autocorrelation into transition rules. The model captures the spatial relationships between explained and explanatory variables and then integrates them into CA transition rules. A conventional CA model (LogCA) based on logistic regression (LR) was studied as a comparison. These two CA models were applied to simulate urban land use change of coastal regions in Ningbo of China from 2000 to 2015. Compared to the LR method, the SAR model yielded smaller accumulated residuals that showed a random distribution in fitting the CA transition rules. The better-fitting SAR model performed well in simulating urban land use change and scored an overall accuracy of 85.3%, improving on the LogCA model by 3.6%. Landscape metrics showed that the pattern generated by the SAR-CA model has less difference with the observed pattern.  相似文献   

大型射电望远镜主反射面调整方法研究          下载免费PDF全文

孙正雄  王锦清  虞林峰  张志斌  王广利 《天文学报》2024,65(2):15

随着毫米波天文学和空间通信的重要性日益提高, 对天线性能提出了越来越高的要求, 而天线性能往往受到其反射器表面精度的限制. 微波全息技术是一种快速有效的检测反射面天线表面轮廓的测量技术. 通过微波全息测量得到天线口径场, 计算天马65m射电望远镜反射面与理想抛物面的偏差. 天马65m射电望远镜的主反射面板是放射状的, 有14圈. 面板的每个角都固定在面板下方促动器的螺栓上进行上下移动, 且相邻面板交点处的拐角共用一个促动器. 采用平面拟合的方法可以计算各块面板拐角处的调整值, 但是同一个促动器会得到4个不同的调整量. 通过平面拟合, 同时以天线照明函数为权重的平差计算方法得到相邻面板拐角的一个平差值, 即天马65m射电望远镜1104个促动器的最佳调整值. 通过多次调整和新算法的应用, 天马65m射电望远镜反射面的面形精度逐渐提高到了0.24mm.  相似文献